ABS
UQ-TZ-HR0370
Automotive interior ,Cockpit module parts, Power window, Switch panel, Pull handle lthough general purpose ABS have good enough mechanical properties for the practical use in terms of process ability,
impact strength, etc, its use is sometimes limited at high temperature due to the deformation of its molded products by heat.
So High Heat Resistant ABS (HR0370) offers an attractive alternative to general purpose ABS and other engineering plastics
making it suitable for the applications designed for the use at high temperature. Mold shrinkage is around 0.4% -0.6%
Applications: Automotive interior, Cockpit module parts, Power window, Switch panel, Pull handle, Console
Drying: Drying prior to processing is recommended in a desiccant de humidifying hopper dryer. An inlet air dew point of
20°F (-29°C) or below is recommended to achieve a moisture content 0.1%. Typical drying conditions are 2 hours at 180°-
190°F (82° - 88°C). Drying for 4 hours at 160° - 170°F (71°-77°C) is also adequate.
impact strength, etc, its use is sometimes limited at high temperature due to the deformation of its molded products by heat.
So High Heat Resistant ABS (HR0370) offers an attractive alternative to general purpose ABS and other engineering plastics
making it suitable for the applications designed for the use at high temperature. Mold shrinkage is around 0.4% -0.6%
Applications: Automotive interior, Cockpit module parts, Power window, Switch panel, Pull handle, Console
Drying: Drying prior to processing is recommended in a desiccant de humidifying hopper dryer. An inlet air dew point of
20°F (-29°C) or below is recommended to achieve a moisture content 0.1%. Typical drying conditions are 2 hours at 180°-
190°F (82° - 88°C). Drying for 4 hours at 160° - 170°F (71°-77°C) is also adequate.
