SD0140 is one of the styrenic ter polymers (ABS) grades with improved toughness versus HIPS grades. SD0140 exhibits
high gloss, low shrinkage, and good dimensional stability. SD0140 is widely used in general injection molding applications.
Use this information as a guide to aid you in selecting the proper resin for your application.
Mold shrinkage is around 0.4% -0.6%
Applications: furniture, automotive parts, general injection molding, appliances casing, office supplies.
Drying: Drying prior to processing is recommended in a desiccant de humidifying hopper dryer. An inlet air dew point of
20°F (-29°C) or below is recommended to achieve a moisture content 0.1%. Typical drying conditions are 2 hours at 180°-
190°F (82° - 88°C). Drying for 4 hours at 160° - 170°F (71°-77°C) is also adequate.
high gloss, low shrinkage, and good dimensional stability. SD0140 is widely used in general injection molding applications.
Use this information as a guide to aid you in selecting the proper resin for your application.
Mold shrinkage is around 0.4% -0.6%
Applications: furniture, automotive parts, general injection molding, appliances casing, office supplies.
Drying: Drying prior to processing is recommended in a desiccant de humidifying hopper dryer. An inlet air dew point of
20°F (-29°C) or below is recommended to achieve a moisture content 0.1%. Typical drying conditions are 2 hours at 180°-
190°F (82° - 88°C). Drying for 4 hours at 160° - 170°F (71°-77°C) is also adequate.
